Home :: Home Kegging

Home Kegging


Beer Fonts
18 products

Kegs
22 products

C02 Cylinders
9 products

 

Products

Sort by: Product Price Default
 
  •  per page
Stainless Stepless Clamps
These stainless clamps are the best for securing your beer and gas line to barbs/nipples. Unlike other hose clamps the secure the line in a complete and exact circle. Hence the name “stepless” clamps.

We have two sizes. The 6-8mm will suit our 5mm and 6mm ID beer line. The 7-10mm ID will suit our 4mm ID beer line.
The clamps can be secured with a special crimping tool however normal wire cutters work just as well.

Our price: AUD 1.08 ($0.00)
Quantity
6mm Poly Joiners/Tees/Elbows
These poly fittings are made from food grade Poly Ethylene making them an inexpensive way for you to join or split your gas or beer line.
• Rated to 100psi
• Will fit beer/gas line with 4mm, 5mm, and 6mm ID
• Made from food grade poly ethylene which will not taint your beer like other plastics.


Our price: AUD 1.99 ($0.00)
Market price: AUD 2.49 , save 20%
Quantity
Beer & Gas Line
Quality beer/gas line.

The internal walls are very smooth creating less turbulence.

The 3 sizes available all have the same OD so it will easily fit any John Guest style push in fittings (5/16” or 8mm). The beer line comes in three different sizes 4mm, 5mm and 6mm ID.

Make sure you select the number of metres in the quantity box.

Our price: AUD 1.99 ($0.00)
Market price: AUD 2.99 , save 33%
Quantity
JG Style Push in Fittings
We make all our push in fittings to suit 8mm (5/16) outside diameter (OD) beer and gas line. Just like the Beer/Gas line above.

These push in fittings are suitable to be used up to 100 psi. They are extremely easy to use and allow you to simply push your beer and gas line straight into these fittings. No need to purchase clamps. To remove the fitting simply push in the blue collet and the fitting comes undone.

Our price: AUD 6.95 ($0.00)
Market price: AUD 7.95 , save 13%
Quantity
8mm Push in Fittings for MFL Disconnects
These great little adaptors screw directly onto your keg setup. They allow you to push your beer/gas line with 8mm OD (5/16”) directly into the fitting. This makes it easy to disconnect the beer/gas line at a later stage and it eliminates the need to use hose clamps. We have two sizes. The smaller type (shown here) that will fit MFL Quick Disconnects and also larger ones that suit 5/8” BSP thread that is on our keg couplers, tap shanks and many other beer related fittings (see related products).

Our price: AUD 6.99 ($0.00)
Market price: AUD 8.99 , save 22%
Quantity
8mm Push in Fittings for 5/8BSP Thread
These great little adaptors screw directly onto your keg setup. They allow you to push your beer/gas line with 8mm OD (5/16”) directly into the fitting. This makes it easy to disconnect the beer/gas line at a later stage and it eliminates the need to use hose clamps. We have two sizes. The smaller type (see related products) that will fit MFL Quick Disconnects and also larger ones that suit 5/8” BSP thread that is on our keg couplers, tap shanks and many other beer related fittings.

Our price: AUD 9.99 ($0.00)
Market price: AUD 13.99 , save 29%
Quantity
Bulkhead for Temperature Probe
This simple bulkhead fitting is made from plastic and can be used to mount your temperature probe from the temperature controllers or the 3” dial thermometers into a any thin wall vessel (such as a pot or fermenter. It will accept any temperature probe or thermometer with 6-6.5mm diameter.

It is sutable for temperatures up to 1050C.

Our price: AUD 14.99 ($0.00)
Market price: AUD 19.99 , save 25%
Quantity
Check Valves / One Way Gas Valve / Non Return Valve
Every keg setup should have one. This handly device will ensure you protect your regulator against reversal of flow in your lines. We have two types available. The white ones (shown in picture to left) come with brass barbs so that they will suit several different gas lines irrespective of the outside diameter (OD). These will also push straight into our gas line splitters.

We also sell an 8mm push in type (seen above in black) so that if you are using 8mm OD gas line the line then it will push directly into the fitting without the need for any clamps.

Our price: AUD 14.99 ($0.00)
Market price: AUD 19.99 , save 25%
Quantity
Gas Line Splitters
These gas line splitters are sold as single pieces as shown in picture on the left. By purchasing more pieces you can split your gas line into as many outputs as you like. The fittings just simply push into each other and require no clips, or additional parts.


Our price: AUD 14.99 ($0.00)
Market price: AUD 19.99 , save 25%
Quantity
Bi-Metal 3” Dial Weldless Thermometer – Long Stem
With this Keg King bi-metal thermometer you can brew with confidence. The weldless fitting means it will mount to your mash tun, hot liquor tank, or kettle.

The 132mm long probe means you will be able to get an accurate reading of the vessel temp in the middle.

NOTE: This is also compatible with the thermowell above or the plastic push-in bulk head below.

Features:
Calibration screw, 304 stainless steel housing and probe, ½” BSP thread, includes slimline nut and 2xsilicone seals plus stainless washer, -5C to 100C customised for brewing.

Our price: AUD 39.95 ($0.00)
Market price: AUD 44.95 , save 11%
Quantity
  •  per page